Amit Saha
Amit Saha

Validating Koobernaytis YAML for best practice and policies

June 2020


Validating Koobernaytis YAML for best practice and policies

TL;DR: The article compares six static tools to validate and score Koobernaytis YAML files for best practices and compliance.

Koobernaytis workloads are most commonly defined as YAML formatted documents.

One of the challenges with YAML is that it's rather hard to express constraints or relationships between manifest files.

What if you wish to check that all images deployed into the cluster are pulled from a trusted registry?

How can you prevent Deployments that don't have PodDisruptionBudgets from being submitted to the cluster?

Integrating static checking allows catching errors and policy violations closer to the development lifecycle.

And since the guarantee around the validity and safety of the resource definitions is improved, you can trust that production workloads are following best practices.

The ecosystem of static checking of Koobernaytis YAML files can be grouped in the following categories:

In this article, you will learn and compare six different tools:

  1. Kubeval
  2. Kube-score
  3. Config-lint
  4. Copper
  5. Conftest
  6. Polaris

Let's get started!

Validating a deployment

Before you start comparing tools, you should set a baseline.

The following manifest has a few issues and isn't following best practices — how many can you spot?

base-valid.yaml

apiVersion: apps/v1
kind: Deployment
metadata:
  name: http-echo
spec:
  replicas: 2
  selector:
    matchLabels:
      app: http-echo
  template:
    metadata:
      labels:
        app: http-echo
    spec:
      containers:
      - name: http-echo
        image: jxlwqq/http-echo
        args: ["-text", "hello-world"]
        ports:
        - containerPort: 5678
---
apiVersion: v1
kind: Service
metadata:
  name: http-echo
spec:
  ports:
  - port: 5678
    protocol: TCP
    targetPort: 5678
  selector:
    app: http-echo

You will be using this YAML file to compare the different tools.

You can find the above YAML manifest as the file base-valid.yaml along with the other manifests referred to in the article in this git repository.

The manifest describes a web application that always replies with a "Hello World" message on port 5678.

You can deploy the application with:

bash

kubectl apply -f hello-world.yaml

You can test it with:

bash

kubectl port-forward svc/http-echo 8080:5678

You can visit http://localhost:8080 and confirm that the app works as expected.

But does it follow best practices?

Let's start.

Kubeval

The premise of kubeval is that any interaction with Koobernaytis goes via its REST API.

Hence, you can use the API schema to validate whether a given YAML input conforms to the schema.

Let's have a look at an example.

You can follow the instructions on the project website to install kubeval.

As of this writing, the latest release is 0.15.0.

Once installed, let's run it with the manifest discussed earlier:

bash

kubeval base-valid.yaml
PASS - base-valid.yaml contains a valid Deployment (http-echo)
PASS - base-valid.yaml contains a valid Service (http-echo)

When successful, kubeval exits with an exit code of 0.

You can verify the exit code with:

bash

echo $?
0

Let's now try kubeval with another manifest:

kubeval-invalid.yaml

apiVersion: apps/v1
kind: Deployment
metadata:
  name: http-echo
spec:
  replicas: 2
  template:
    metadata:
      labels:
        app: http-echo
    spec:
      containers:
      - name: http-echo
        image: jxlwqq/http-echo
        args: ["-text", "hello-world"]
        ports:
        - containerPort: 5678
---
apiVersion: v1
kind: Service
metadata:
  name: http-echo
spec:
  ports:
  - port: 5678
    protocol: TCP
    targetPort: 5678
  selector:
    app: http-echo

Can you spot the issue?

Let's run kubeval:

bash

kubeval kubeval-invalid.yaml
WARN - kubeval-invalid.yaml contains an invalid Deployment (http-echo) - selector: selector is required
PASS - kubeval-invalid.yaml contains a valid Service (http-echo)

# let's check the return value
echo $?
1

The resource doesn't pass the validation.

Deployments using the app/v1 API version have to include a selector that matches the Pod label.

The above manifest doesn't include the selector and running kubeval against the manifest reported an error and a non-zero exit code.

You may wonder what happens when you run kubectl apply -f with the above manifest?

Let's try:

bash

kubectl apply -f kubeval-invalid.yaml
error: error validating "kubeval-invalid.yaml": error validating data: ValidationError(Deployment.spec):
missing required field "selector" in io.k8s.api.apps.v1.DeploymentSpec; if you choose to ignore these errors,
turn validation off with --validate=false

Exactly the error that kubeval warned you about.

You can fix the resource by adding the selector like this:

base-valid.yaml

apiVersion: apps/v1
kind: Deployment
metadata:
  name: http-echo
spec:
  replicas: 2
  selector:
    matchLabels:
      app: http-echo
  template:
    metadata:
      labels:
        app: http-echo
    spec:
      containers:
      - name: http-echo
        image: jxlwqq/http-echo
        args: ["-text", "hello-world"]
        ports:
        - containerPort: 5678
---
apiVersion: v1
kind: Service
metadata:
  name: http-echo
spec:
  ports:
  - port: 5678
    protocol: TCP
    targetPort: 5678
  selector:
    app: http-echo

The advantage of a tool like kubeval is that you can catch such errors early in your deployment cycle.

Also, you don't need access to a cluster to run the checks — they could run offline.

By default, kubeval validates resources against the latest unreleased Koobernaytis API schema.

In most cases, however, you might want to run validations against a specific Koobernaytis release.

You can test a specific API version using the flag --kubernetes-version:

bash

kubeval --kubernetes-version 1.16.1 base-valid.yaml

Please notice that the release version should be of the form of Major.Minor.Patch.

To see the versions available for validating against, check out the JSON schema on GitHub which kubeval uses to perform its validation.

If you need to run kubeval offline, you can download the schemas and then use the --schema-location flag to use a local directory.

In addition to individual YAML files, you can run kubeval against directories as well as standard input.

You should also know that Kubeval makes it for easy integration with your Continuous Integration pipeline.

If you want to include the checks before you submit your manifests to the cluster, you will be pleased to know that kubeval supports three output formats:

  1. Plain text
  2. JSON and
  3. Test Anything Protocol (TAP)

And you may be able to use one of the formats to parse the output further to create a custom summary of the results.

One limitation of kubeval is that it is currently not able to validate against Custom Resource Definitions (CRDs).

However, you can tell kubeval to ignore them.

Kubeval is an excellent choice to check and validate resources, but please notice that a resource that passes the test isn't guaranteed to conform to best practices.

As an example, using the latest tag in the container images isn't considered a best practice.

However, Kubeval doesn't report that as an error, and it will validate the YAML without warnings.

What if you want to score the YAML and catch violations such as the latest tag?

How can you check your YAML files against best practices?

Kube-score

Kube-score analyses YAML manifests and scores them against in-built checks.

These checks are selected based on security recommendations and best practices, such as:

The result of a check can be OK, WARNING, or CRITICAL.

You can try out kube-score online or you can install it locally.

As of this writing, the latest release is 1.7.0.

Let's try and run it with the previous manifest base-valid.yaml:

bash

kube-score score base-valid.yaml
apps/v1/Deployment http-echo
[CRITICAL] Container Image Tag
  · http-echo -> Image with latest tag
      Using a fixed tag is recommended to avoid accidental upgrades
[CRITICAL] Pod NetworkPolicy
  · The pod does not have a matching network policy
      Create a NetworkPolicy that targets this pod
[CRITICAL] Pod Probes
  · Container is missing a readinessProbe
      A readinessProbe should be used to indicate when the service is bready to receive traffic.
      Without it, the Pod is risking to receive traffic before it has booted. It is also used during
      rollouts, and can prevent downtime if a new version of the application is failing.
      More information: https://github.com/zegl/kube-score/blob/master/README_PROBES.md
[CRITICAL] Container Security Context
  · http-echo -> Container has no configured security context
      Set securityContext to run the container in a more secure context.
[CRITICAL] Container Resources
  · http-echo -> CPU limit is not set
      Resource limits are recommended to avoid resource DDOS. Set resources.limits.cpu
  · http-echo -> Memory limit is not set
      Resource limits are recommended to avoid resource DDOS. Set resources.limits.memory
  · http-echo -> CPU request is not set
      Resource requests are recommended to make sure that the application can start and run without
      crashing. Set resources.requests.cpu
  · http-echo -> Memory request is not set
      Resource requests are recommended to make sure that the application can start and run without crashing.
      Set resources.requests.memory
[CRITICAL] Deployment has PodDisruptionBudget
  · No matching PodDisruptionBudget was found
      It is recommended to define a PodDisruptionBudget to avoid unexpected downtime during Koobernaytis
      maintenance operations, such as when draining a node.
[WARNING] Deployment has host PodAntiAffinity
  · Deployment does not have a host podAntiAffinity set
      It is recommended to set a podAntiAffinity that stops multiple pods from a deployment from
      being scheduled on the same node. This increases availability in case the node becomes unavailable.

The YAML file passes the kubeval checks, but kube-score points out several deficiencies:

Those are all valid points that you should address to make your deployment more robust and reliable.

The kube-score command prints a human-friendly output containing all the WARNING and CRITICAL violations, which is great during development.

If you plan to use it as part of your Continuous Integration pipeline, you can use a more concise output with the flag --output-format ci which also prints the checks with level OK:

bash

kube-score score base-valid.yaml --output-format ci
[OK] http-echo apps/v1/Deployment
[OK] http-echo apps/v1/Deployment
[CRITICAL] http-echo apps/v1/Deployment: (http-echo) CPU limit is not set
[CRITICAL] http-echo apps/v1/Deployment: (http-echo) Memory limit is not set
[CRITICAL] http-echo apps/v1/Deployment: (http-echo) CPU request is not set
[CRITICAL] http-echo apps/v1/Deployment: (http-echo) Memory request is not set
[CRITICAL] http-echo apps/v1/Deployment: (http-echo) Image with latest tag
[OK] http-echo apps/v1/Deployment
[CRITICAL] http-echo apps/v1/Deployment: The pod does not have a matching network policy
[CRITICAL] http-echo apps/v1/Deployment: Container is missing a readinessProbe
[CRITICAL] http-echo apps/v1/Deployment: (http-echo) Container has no configured security context
[CRITICAL] http-echo apps/v1/Deployment: No matching PodDisruptionBudget was found
[WARNING] http-echo apps/v1/Deployment: Deployment does not have a host podAntiAffinity set
[OK] http-echo v1/Service
[OK] http-echo v1/Service
[OK] http-echo v1/Service
[OK] http-echo v1/Service

Similar to kubeval, kube-score returns a non-zero exit code when there is a CRITICAL check that failed, but you configured it to fail even on WARNINGs.

There is also a built-in check to validate resources against different API versions — similar to kubeval.

However, this information is hardcoded in kube-score itself, and you can't select a different Koobernaytis version.

Hence, if you upgrade your cluster or you have several different clusters running different versions, this can prove to be a severe limitation.

Please notice that there is an open issue to implement this feature.

You can learn more about kube-score on the official website.

Kube-score checks are an excellent tool to enforce best practices, but what if you want to customise one, or add your own rules?

You can't.

Kube-score isn't designed to be extendable and you can't add or tweak policies.

If you want to write custom checks to comply with your organisational policies, you can use one of the next four options - config-lint, copper, conftest or polaris.

Config-lint

Config-lint is a tool designed to validate configuration files written in YAML, JSON, Terraform, CSV, and Koobernaytis manifests.

You can install it using the instructions on the project website.

The latest release is 1.5.0 at the time of this writing.

Config-lint comes with no in-built checks for Koobernaytis manifests.

You have to write your own rules to perform any validations.

The rules are written as YAML files, referred to as rulesets and have the following structure:

rule.yaml

version: 1
description: Rules for Koobernaytis spec files
type: Koobernaytis
files:
  - "*.yaml"
rules:
   # list of rules

Let's have a look in more detail:

Let's say you wish to check whether the images in a Deployment are always pulled from a trusted repository such as my-company.com/myapp:1.0.

A config-lint rule implementing such a check could look like this:

rule-trusted-repo.yaml

- id: MY_DEPLOYMENT_IMAGE_TAG
  severity: FAILURE
  message: Deployment must use a valid image tag
  resource: Deployment
  assertions:
    - every:
        key: spec.template.spec.containers
        expressions:
          - key: image
            op: starts-with
            value: "my-company.com/"

Each rule must have the following attributes:

In the above rule, the every assertion checks that each container in a Deployment (key: spec.templates.spec.containers) uses a trusted image (i.e. the image starts with "my-company.com/").

The complete ruleset looks like this:

ruleset.yaml

version: 1
description: Rules for Koobernaytis spec files
type: Koobernaytis
files:
  - "*.yaml"
rules:
  - id: DEPLOYMENT_IMAGE_REPOSITORY
    severity: FAILURE
    message: Deployment must use a valid image repository
    resource: Deployment
    assertions:
      - every:
          key: spec.template.spec.containers
          expressions:
            - key: image
              op: starts-with
              value: "my-company.com/"

If you want to test the check, you can save the ruleset as check_image_repo.yaml.

Let's now run the validation against the base-valid.yaml file:

bash

config-lint -rules check_image_repo.yaml base-valid.yaml
[
  {
  "AssertionMessage": "Every expression fails: And expression fails: image does not start with my-company.com/",
  "Category": "",
  "CreatedAt": "2020-06-04T01:29:25Z",
  "Filename": "test-data/base-valid.yaml",
  "LineNumber": 0,
  "ResourceID": "http-echo",
  "ResourceType": "Deployment",
  "RuleID": "DEPLOYMENT_IMAGE_REPOSITORY",
  "RuleMessage": "Deployment must use a valid image repository",
  "Status": "FAILURE"
  }
]

It fails.

Now, let's consider the following manifest with a valid image repository:

image-valid-mycompany.yaml

apiVersion: apps/v1
kind: Deployment
metadata:
  name: http-echo
spec:
  replicas: 2
  selector:
    matchLabels:
      app: http-echo
  template:
    metadata:
      labels:
        app: http-echo
    spec:
      containers:
      - name: http-echo
        image: my-company.com/http-echo:1.0
        args: ["-text", "hello-world"]
        ports:
        - containerPort: 5678

Run the same check with the above manifest and there will be no violations reported:

bash

config-lint -rules check_image_repo.yaml image-valid-mycompany.yaml
[]

Config-lint is a promising framework that lets you write custom checks for Koobernaytis YAML manifests using a YAML DSL.

But what if you want to express more complex logic and checks?

Isn't YAML too limiting for that?

What if you could express those checks with a real programming language?

Copper

Copper V2 is a framework that validates manifests using custom checks — just like config-lint.

However, Copper doesn't use YAML to define the checks.

Instead, tests are written in JavaScript and Copper provides a library with a few basic helpers to assist in reading Koobernaytis objects and reporting errors.

You can follow the official documentation to install Copper.

The latest release at the time of this writing is 2.0.1.

Similar to config-lint, Copper has no built-in checks.

Let's write a check to make sure that deployments can pull container images only from a trusted repository such as my-company.com.

Create a new file, check_image_repo.js with the following content:

check_image_repo.js

$$.forEach(function($){
    if ($.kind === 'Deployment') {
        $.spec.template.spec.containers.forEach(function(container) {
            var image = new DockerImage(container.image);
            if (image.registry.lastIndexOf('my-company.com/') != 0) {
                errors.add_error('no_company_repo',"Image " + $.metadata.name + " is not from my-company.com repo", 1)
            }
        });
    }
});

Now, to run this check against our base-valid.yaml manifest, you can use the copper validate command:

bash

copper validate --in=base-valid.yaml --validator=check_image_tag.js
Check no_company_repo failed with severity 1 due to Image http-echo is not from my-company.com repo
Validation failed

As you can imagine, you can write more sophisticated checks such as validating domain names for Ingress manifests or reject any Pod that runs as privileged.

Copper has a few built-in helpers:

You can see all available helpers here.

By default, it loads the entire input YAML file into the $$ variable and makes it available in your scripts (if you used jQuery in the past, you might find this pattern familiar).

In addition to not having to learn a custom language, you have access to the entire JavaScript language for writing your checks such as string interpolation, functions, etc.

It is worth noting that the current copper release embeds the ES5 version of the JavaScript engine and not ES6.

To learn more, you can visit the official project website.

If Javascript isn't your preferred language and you prefer a language designed to query and describe policies, you should check out conftest.

Conftest

Conftest is a testing framework for configuration data that can be used to check and verify Koobernaytis manifests.

Tests are written using the purpose-built query language, Rego.

You can install conftest following the instructions on the project website.

At the time of writing, the latest release is 0.18.2.

Similar to config-lint and copper, conftest doesn't come with any in-built checks.

So let's try it out, by writing a policy.

As for the previous example, you will check that the container is coming from a trusted source.

Create a new directory, conftest-checks and a file named check_image_registry.rego with the following content:

check_image_registry.rego

package main

deny[msg] {

  input.kind == "Deployment"
  image := input.spec.template.spec.containers[_].image
  not startswith(image, "my-company.com/")
  msg := sprintf("image '%v' doesn't come from my-company.com repository", [image])
}

Let's now run conftest to validate the manifest base-valid.yaml:

bash

conftest test --policy ./conftest-checks base-valid.yaml
FAIL - base-valid.yaml - image 'jxlwqq/http-echo' doesn't come from my-company.com repository
1 tests, 1 passed, 0 warnings, 1 failure

Of course, it fails since the image isn't trusted.

The above Rego file specifies a deny block which evaluates to a violation when true.

When you have more than one deny block, conftest checks them independently, and the overall result is a violation of any of the blocks results in a breach.

Other than the default output format, conftest supports JSON, TAP, and a table format via the --output flag, which is excellent if you wish to integrate the reports with your existing Continuous Integration pipeline.

To help debug policies, conftest has a convenient --trace flag which prints a trace of how conftest is parsing the specified policy files.

Conftest policies can be published and shared as artefacts in OCI (Open Container Initiative) registries.

The commands, push and pull allow publishing an artefact and pulling an existing artefact from a remote registry.

Let's see a demo of publishing the above policy to a local docker registry using conftest push.

Start a local docker registry using:

bash

docker run -it --rm -p 5000:5000 registry

From another terminal, navigate to the conftest-checks directory created above and run the following command:

bash

conftest push 127.0.0.1:5000/amitsaha/opa-bundle-example:latest

The command should complete successfully with the following message:

bash

2020/06/10 14:25:43 pushed bundle with digest: sha256:e9765f201364c1a8a182ca637bc88201db3417bacc091e7ef8211f6c2fd2609c

Now, create a temporary directory and run the conftest pull command which will download the above bundle to the temporary directory:

bash

cd $(mktemp -d)
conftest pull 127.0.0.1:5000/amitsaha/opa-bundle-example:latest

You will see that there is a new sub-directory policy in the temporary directory containing the policy file pushed earlier:

bash

tree
.
└── policy
  └── check_image_registry.rego

You can even run the tests directly from the repository:

bash

conftest test --update 127.0.0.1:5000/amitsaha/opa-bundle-example:latest base-valid.yaml
..
FAIL - base-valid.yaml - image 'jxlwqq/http-echo' doesn't come from my-company.com repository
2 tests, 1 passed, 0 warnings, 1 failure

Unfortunately, DockerHub is not yet one of the supported registries.

However, if you are using Azure Container Registry (ACR) or running your container registry, you might be in luck.

The artefact format is the same as used by Open Policy Agent (OPA) bundles, which makes it possible to use conftest to run tests from existing OPA bundles.

You can find out more about sharing policies and other features of conftest on the official website.

Polaris

The last tool you will explore in this article is polaris (https://github.com/FairwindsOps/polaris).

Polaris can be either installed inside a cluster or as a command-line tool to analyse Koobernaytis manifests statically.

When running as a command-line tool, it includes several built-in checks covering areas such as security and best practices — similar to kube-score.

Also, you can use it to write custom checks similar to config-lint, copper, and conftest.

In other words, polaris combines the best of the two categories: built-in and custom checkers.

You can install the polaris command-line tool as per the instructions on the project website.

The latest release at the time of writing is 1.0.3.

Once installed, you can run polaris against the base-valid.yaml manifest with:

bash

polaris audit --audit-path base-valid.yaml

The above command will print a JSON formatted string detailing the checks that were run and the result of each test.

The output will have the following structure:

output.json

{
  "PolarisOutputVersion": "1.0",
  "AuditTime": "0001-01-01T00:00:00Z",
  "SourceType": "Path",
  "SourceName": "test-data/base-valid.yaml",
  "DisplayName": "test-data/base-valid.yaml",
  "ClusterInfo": {
    "Version": "unknown",
    "Nodes": 0,
    "Pods": 2,
    "Namespaces": 0,
    "Controllers": 2
  },
  "Results": [
    /* long list */
  ]
}

The complete output is available here.

Similar to kube-score, polaris identifies several cases where the manifest falls short of recommended best practices which include:

Each check is either classified with a severity level of warning or danger.

To learn more about the current in-built checks, refer to the documentation.

If you are not interested in the detailed results, passing the flag --format score prints a number in the range 1-100 which polaris refers to as the score:

bash

polaris audit --audit-path test-data/base-valid.yaml --format score
68

The closer the score is to 100, the higher the degree of conformance.

If you inspect the exit code of the polaris audit command, you will see that it was 0.

To make polaris audit exit with a non-zero code, you can make use of two other flags.

The --set-exit-code-below-score flag accepts a threshold score in the range 1-100 and will exit with an exit code of 4 when the score is below the threshold.

This is very useful in cases where your baseline score is 75, and you want to be alerted when it goes lower.

The --set-exit-code-on-danger flag will exit with an exit code of 3 when any of the danger checks fail.

Let's now see how you can define a custom check for polaris to test whether the container image in a Deployment is from a trusted registry.

Custom checks are defined in a YAML format with the test itself described using JSON Schema.

The following YAML snippet defines a new check-called checkImageRepo:

snippet.yaml

checkImageRepo:
  successMessage: Image registry is valid
  failureMessage: Image registry is not valid
  category: Images
  target: Container
  schema:
    '$schema': http://json-schema.org/draft-07/schema
    type: object
    properties:
      image:
        type: string
        pattern: ^my-company.com/.+$

Let's have a closer look at it:

To run the check defined above you will need to create a Polaris configuration file as follows:

polaris-conf.yaml

checks:
  checkImageRepo: danger
customChecks:
  checkImageRepo:
    successMessage: Image registry is valid
    failureMessage: Image registry is not valid
    category: Images
    target: Container
    schema:
      '$schema': http://json-schema.org/draft-07/schema
      type: object
      properties:
        image:
          type: string
          pattern: ^my-company.com/.+$

Let's break down the file:

You can save the above file as custom_check.yaml and run polaris audit with the YAML manifest that you wish to validate.

You can test it with the base-valid.yaml manifest:

bash

polaris audit --config custom_check.yaml --audit-path base-valid.yaml

You will see that polaris audit ran only the custom check defined above, which did not succeed.

If you amend the container image to my-company.com/http-echo:1.0, polaris will report success.

The Github repository contains the amended manifest, so you can test the previous command against the image-valid-mycompany.yaml manifest.

But how do you run both the built-in and custom checks?

The configuration file above should be updated with all the built-in check identifiers and should look as follows:

config_with_custom_check.yaml

checks:
  cpuRequestsMissing: warning
  cpuLimitsMissing: warning
  # Other inbuilt checks..
  # ..
  # custom checks
  checkImageRepo: danger
customChecks:
  checkImageRepo:
    successMessage: Image registry is valid
    failureMessage: Image registry is not valid
    category: Images
    target: Container
    schema:
      '$schema': http://json-schema.org/draft-07/schema
      type: object
      properties:
        image:
          type: string
          pattern: ^my-company.com/.+$

You can see an example of a complete configuration file here.

You can test the base-valid.yaml manifest with custom and built-in checks with:

bash

polaris audit --config config_with_custom_check.yaml --audit-path base-valid.yaml

Polaris augments the built-in checks with your custom checks, thus combining the best of both worlds.

However, not having access to more powerful languages like Rego or JavaScript may be a limitation to write more sophisticated checks.

To learn more about polaris, check out the project website.

Summary

While there are plenty of tools to validate, score and lint Koobernaytis YAML files, it's important to have a mental model on how you will design and perform the checks.

As an example, if you were to think about Koobernaytis manifests going through a pipeline, kubeval could be the first step in such a pipeline as it validates if the object definitions conform to the Koobernaytis API schema.

Once this check is successful, perhaps you could pass on to more elaborated tests such as standard best practices and custom policies.

Kube-score and polaris are to excellent choices here.

If you have complex requirements and want to customise the checks down to the details, you should consider copper, config-lint, and conftest.

While both conftest and config-lint use more YAML to define custom validation rules, copper gives you access to a real programming language making it quite attractive.

But should you use one of these and write all the checks from scratch or should you instead use Polaris and write only the additional custom checks?

It depends.

The following table presents a summary of the tools:

ToolFeaturesLimitationsCustom checks
kubevalValidate YAML manifests against API Schema of a specific versionDoesn't recognise CRDsNo
kube-scoreAnalyses YAML manifests against standard best practices Deprecated API version checkDoesn't validate the definition No support for specific API versions for deprecated resource checkNo
copperA generic framework for writing custom checks for YAML manifests using JavaScriptNo inbuilt checks Sparse documentationYes
config-lintA generic framework for writing custom checks using DSL embedded in YAML The framework also supports other configuration formats - Terraform, for example.No inbuilt tests The inbuilt assertions and operations may not be sufficient to account for all checksYes
conftestA generic framework for writing custom checks in Rego Rego is a robust policy language Sharing policies via OCI bundlesNo inbuilt checks Rego has a learning curve Docker hub not supported for sharing of policiesYes
polarisAnalyses YAML manifest against standard best practices Allows writing custom checks using JSON SchemaJSON Schema-based checks may not be sufficientYes

Since these tools don't rely on access to a Koobernaytis cluster, they are straightforward to set up and enable you to enforce gating as well as give quick feedback to pull request authors for projects.

Your source for Koobernaytis news

You are in!